#!/bin/bash
#
# new-kernel-pkg
# Invoked upon installation or removal of a kernel package, the following
# tasks are/can be done here:
# creation/removal of initrd
# run of depmod/removal of depmod generated files
# addition/removal of kernel images from grub/lilo configuration (via grubby)
#
# Copyright 2002-2008 Red Hat, Inc.  All rights reserved.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.
#

PATH=/sbin:/bin:$PATH

lilo=/sbin/lilo

# some defaults that are sane for most arches
kernelName=vmlinuz

if [ -x ./grubby ]; then
    grubby=./grubby
else
    grubby=/sbin/grubby
fi

[ -f /etc/sysconfig/kernel ] && . /etc/sysconfig/kernel

cfgGrub2=""
cfgGrub2Efi=""
cfgGrub=""
cfgLilo=""
cfgExtlinux=""
cfguBoot=""
runLilo=""
grubConfig=""
grub2Config=""
grub2EfiConfig=""
extlinuxConfig=""

ARCH=$(uname -m)

if [ $ARCH = 'ia64' ]; then
    liloConfig=/boot/efi/EFI/redhat/elilo.conf
    bootPrefix=/boot/efi/EFI/redhat
    liloFlag=elilo
    isx86=""
elif [ $ARCH = 'ppc64' -o $ARCH = 'ppc' ]; then
    liloConfig=/etc/yaboot.conf
    grub2Config=$(readlink -f /etc/grub2.cfg 2>/dev/null)
    bootPrefix=/boot
    lilo=/sbin/ybin
    liloFlag=yaboot
    runLilo="yes"
    isx86=""
elif [ $ARCH = 'sparc' -o $ARCH = 'sparc64' ]; then
    liloConfig=/etc/silo.conf
    bootPrefix=/boot
    liloFlag=silo
    lilo=/sbin/silo
    isx86=""
elif [ $ARCH = 's390' -o $ARCH = 's390x' ]; then
    liloConfig=/etc/zipl.conf
    bootPrefix=/boot
    liloFlag=zipl
    lilo=/sbin/zipl
    runLilo="yes"
    isx86=""
elif [[ ${ARCH} =~ armv[5|7].*l ]] ; then
    liloConfig=""
    bootPrefix=/boot
    extlinuxConfig=$(readlink -f /etc/extlinux.conf 2>/dev/null)
    mounted=""
    liloFlag=""
    isx86=""
else
    # this leaves i?86 and x86_64
    liloConfig=/etc/lilo.conf
    grubConfig=$(readlink -f /etc/grub.conf 2>/dev/null)
    grub2Config=$(readlink -f /etc/grub2.cfg 2>/dev/null)
    grub2EfiConfig=$(readlink -f /etc/grub2-efi.cfg 2>/dev/null)
    extlinuxConfig=$(readlink -f /etc/extlinux.conf 2>/dev/null)
    bootPrefix=/boot
    liloFlag=lilo
    isx86="yes"
fi

mode=""
version=""
initrd=""
dracut=""
dracuthostonly=""
initrdfile=""
devtreefile=""
moddep=""
verbose=""
makedefault=""
package=""
mbkernel="$HYPERVISOR"
mbargs="$HYPERVISOR_ARGS"
adddracutargs=""
addplymouthinitrd=""
DEBUGARG="systemd.log_level=debug systemd.log_target=kmsg"

usage() {
    echo "Usage: `basename $0` [-v] [--mkinitrd] [--rminitrd] [--dracut]" >&2
    echo "       [--initrdfile=<initrd-image>] [--depmod] [--rmmoddep]" >&2
    echo "       [--kernel-args=<args>] [--remove-args=<args>]" >&2
    echo "       [--banner=<banner>] [--multiboot=multiboot]" >&2
    echo "       [--mbargs=mbargs] [--make-default] [--add-dracut-args]" >&2
    echo "       [--add-plymouth-initrd]" >&2
    echo "       [--host-only] [--devtree=<devicetree.dtb>] [--devtreedir=</devicetree/path/>]" >&2
    echo "       <--install | --remove | --update | --rpmposttrans> <kernel-version>" >&2
    echo "       (ex: `basename $0` --mkinitrd --depmod --install 2.4.7-2)" >&2
    exit 1
}

rungrubby() {
	if [ "$1" == "--debug" ]; then
		[ "$MAKEDEBUG" != "yes" ] && return 0
		[ -n "$verbose" ] && echo "- First, making a debug entry."
		declare -x debugtitle=" with debugging"
		declare -x debugargs="$DEBUGARG"
		shift
	else
		[ -n "$verbose" ] && echo "- Making a normal entry."
	fi
	$(eval $grubby $@)
	export -n debugargs
	export -n debugtitle
	unset debugargs
	unset debugtitle
}

set_title() {
    if [ -n "$banner" ]; then
	if [ $ARCH = 's390' -o $ARCH = 's390x' ]; then
	    title=$(echo $banner | sed 's/ /_/g')
	else
	    title="$banner ($version)"
	fi
    elif [ $ARCH = 's390' -o $ARCH = 's390x' ]; then
	title=$(echo $version | sed 's/ /_/g')
    elif [ -f /etc/os-release ]; then
	. /etc/os-release
	title="$NAME ($version) $VERSION"
    elif [ -f /etc/redhat-release ]; then
	title="$(sed 's/ release.*$//' < /etc/redhat-release) ($version)"
    else
	title="Red Hat Linux ($version)"
    fi
}

install() {
    # XXX kernel should be able to be specified also (or work right on ia64)
    if [ ! -f $kernelImage ] ; then
	[ -n "$verbose" ] && echo "kernel for $version does not exist, not running grubby"
	return
    fi

    INITRD=""
    if [ -f $initrdfile ]; then
	[ -n "$verbose" ] && echo "found $initrdfile and using it with grubby"
	INITRD="--initrd $initrdfile"

	if [ -n "$addplymouthinitrd" ]; then
	    INITRD="$INITRD --extra-initrd $bootPrefix/initrd-plymouth.img"
	fi
    fi

    DEVTREE=""
    if [ -n "$devtreefile" -a -f "$devtreefile" ]; then
	[ -n "$verbose" ] && echo "found $devtreefile and using it with grubby"
	DEVTREE="--devtree $devtreefile"
    fi

    DEVTREEDIR=""
    if [ -n "$devtreedir" -a -d "$devtreedir" ]; then
	[ -n "$verbose" ] && echo "found $devtreedir and using it with grubby"
	DEVTREEDIR="--devtreedir $devtreedir"
    fi

    # FIXME: is this a good heuristic to find out if we're on iSeries?
    if [ -d /proc/iSeries ]; then
	[ -n "$verbose" ] && echo "On an iSeries, just making img file"
	if [ -z $initrdfile  ]; then
	    [ -n "$verbose" ] && echo "No initrd, just adding system map"
	    /sbin/addSystemMap $bootPrefix/System.map-$version $kernelImage $bootPrefix/vmlinitrd-$version
	else
	    /sbin/addSystemMap $bootPrefix/System.map-$version $kernelImage $bootPrefix/vmlinux.sm-$version
	    /sbin/addRamDisk $initrdfile $bootPrefix/System.map-$version $bootPrefix/vmlinux.sm-$version $bootPrefix/vmlinitrd-$version 2>/dev/null
	    rm $bootPrefix/vmlinux.sm-$version
	fi
	return
    fi

    # get the root filesystem to use
    rootdevice=$(awk '{ if ($1 !~ /^[ \t]*#/ && $2 == "/") { print $1; }}' /etc/fstab 2>/dev/null)
    if [ "$rootdevice" = "" ];
    then
	    rootdevice=`grep -o -P "(?<=root=)\S+" /proc/cmdline`
    fi

    if [ -n "$mbkernel" -a -n "$cfgLilo" -a "$liloFlag" != "elilo" ]; then
	[ -n "$verbose" ] && echo "multiboot specified, not updating lilo.conf"
	cfgLilo=""
    fi

    set_title

    if [ -n "$cfgGrub" ]; then
	[ -n "$verbose" ] && echo "adding $version to $grubConfig"

	ARGS="--grub -c $grubConfig --add-kernel=$kernelImage $INITRD \
		${mbkernel:+--add-multiboot=\"$mbkernel\"} \
		${mbargs:+--mbargs=\"$mbargs\"} \
		--title=\"$title\$debugtitle\" --copy-default \
		--args=\"root=$rootdevice $kernargs \$debugargs\" \
		--remove-kernel=\"TITLE=$title\$debugtitle\""

	rungrubby ${ARGS} $makedefault
	rungrubby --debug ${ARGS}
    else
	[ -n "$verbose" ] && echo "$grubConfig does not exist, not running grubby for grub 0.97"
    fi
    if [ -n "$cfgGrub2" ]; then
	[ -n "$verbose" ] && echo "adding $version to $grub2Config"

	ARGS="--grub2 -c $grub2Config --add-kernel=$kernelImage $INITRD \
		--copy-default --title \"$title\$debugtitle\" \
		${mbkernel:+--add-multiboot=\"$mbkernel\"} \
		${mbargs:+--mbargs=\"$mbargs\"} \
		--args=\"root=$rootdevice $kernargs \$debugargs\" \
		--remove-kernel=\"TITLE=$title\$debugtitle\""
	rungrubby ${ARGS} $makedefault
	rungrubby --debug ${ARGS}
    else
	[ -n "$verbose" ] && echo "$grub2Config does not exist, not running grubby for grub 2"
    fi
    if [ -n "$cfgGrub2Efi" ]; then
	[ -n "$verbose" ] && echo "adding $version to $grub2EfiConfig"

	ARGS="--grub2 -c $grub2EfiConfig --efi \
		--add-kernel=$kernelImage $DEVTREE $INITRD \
		--copy-default --title \"$title\$debugtitle\" \
		${mbkernel:+--add-multiboot=\"$mbkernel\"} \
		${mbargs:+--mbargs=\"$mbargs\"} \
		--args=\"root=$rootdevice $kernargs \$debugargs\" \
		--remove-kernel=\"TITLE=$title\$debugtitle\""
	rungrubby ${ARGS} $makedefault
	rungrubby --debug ${ARGS}
    else
	[ -n "$verbose" ] && echo "$grub2EfiConfig does not exist, not running grubby for grub 2 with UEFI"
    fi

    if [ -n "$cfgLilo" ]; then
	[ -n "$verbose" ] && echo "adding $version to $liloConfig"

	ARGS="--$liloFlag --add-kernel=$kernelImage $INITRD \
		--copy-default --title \"$title\$debugtitle\" \
		${mbkernel:+--add-multiboot=\"$mbkernel\"} \
		${mbargs:+--mbargs=\"$mbargs\"} \
		--args=\"root=$rootdevice $kernargs \$debugargs\" \
		--remove-kernel=\"TITLE=$version\""

	rungrubby ${ARGS} $makedefault
	rungrubby --debug ${ARGS}
	if [ -n "$runLilo" ]; then
	    [ -n "$verbose" ] && echo "running $lilo"
	    if [ ! -x $lilo ] ; then
		[ -n "$verbose" ] && echo "$lilo does not exist"
	    else
		$lilo > /dev/null
	    fi
	fi
    else
	[ -n "$verbose" ] && echo "$liloConfig does not exist, not running grubby"
    fi

    if [ -n "$cfgExtlinux" ]; then
	[ -n "$verbose" ] && echo "adding $version to $extlinuxConfig"

	ARGS="--extlinux -c $extlinuxConfig --add-kernel=$kernelImage \
	    $DEVTREEDIR $DEVTREE \
	    $INITRD --copy-default --title \"$title\$debugtitle\" \
	    ${mbkernel:+--add-multiboot=\"$mbkernel\"} \
	    ${mbargs:+--mbargs=\"$mbargs\"} \
	    --args=\"root=$rootdevice $kernargs \$debugargs\" \
	    --remove-kernel=\"TITLE=$title\$debugtitle\""

	rungrubby ${ARGS} $makedefault
	rungrubby --debug ${ARGS}
    else
	[ -n "$verbose" ] && echo "$extlinuxConfig does not exist, not running grubby for extlinux"
    fi
}

rpmposttrans()
{
    local files
    local f
    files="/etc/kernel/postinst.d/*[^~] /etc/kernel/postinst.d/$version/*[^~]"
    for f in $files ; do
	[ -f $f ] && [ -x $f ] || continue
	$f $version $kernelImage
    done
}

remove() {
    # FIXME: is this a good heuristic to find out if we're on iSeries?
    if [ -d /proc/iSeries ]; then
	[ -n "$verbose" ] && echo "On an iSeries, remove img file"
	rm -f $kernelImage.img 2>/dev/null
	return
    fi

    local files
    local f
    files="/etc/kernel/prerm.d/*[^~] /etc/kernel/prerm.d/$version/*[^~]"
    for f in $files ; do
	[ -f $f ] && [ -x $f ] || continue
	$f $version $kernelImage
    done

    if [ -n "$cfgGrub" ]; then
	[ -n "$verbose" ] && echo "removing $version from $grubConfig"
	$grubby --grub -c $grubConfig \
	    --remove-kernel=$kernelImage
    else
	[ -n "$verbose" ] && echo "$grubConfig does not exist, not running grubby for grub 0.97"
    fi
    if [ -n "$cfgGrub2" ]; then
	[ -n "$verbose" ] && echo "removing $version from $grub2Config"
	$grubby --grub2 -c $grub2Config \
		--remove-kernel=$kernelImage
    else
	[ -n "$verbose" ] && echo "$grub2Config does not exist, not running grubby for grub 2"
    fi
    if [ -n "$cfgGrub2Efi" ]; then
	[ -n "$verbose" ] && echo "removing $version from $grub2EfiConfig"
	$grubby --grub2 -c $grub2EfiConfig --efi \
		--remove-kernel=$kernelImage
    else
	[ -n "$verbose" ] && echo "$grub2EfiConfig does not exist, not running grubby grub 2 with UEFI"
    fi

    if [ -n "$cfgLilo" ]; then
	[ -n "$verbose" ] && echo "removing $version from $liloConfig"
	$grubby --remove-kernel=$kernelImage	    \
		     --$liloFlag

	if [ -n "$runLilo" ]; then
	    [ -n "$verbose" ] && echo "running $lilo"
	    if [ ! -x $lilo ] ; then
		[ -n "$verbose" ] && echo "$lilo does not exist"
	    else
		$lilo > /dev/null
	    fi
	fi
    else
	[ -n "$verbose" ] && echo "$liloConfig does not exist, not running grubby"
    fi

    if [ -n "$cfgExtlinux" ]; then
	[ -n "$verbose" ] && echo "removing $version from $extlinuxConfig"
	$grubby --extlinux -c $extlinuxConfig \
	    --remove-kernel=$kernelImage
    else
	[ -n "$verbose" ] && echo "$extlinuxConfig does not exist, not running grubby for extlinux"
    fi
}

update() {
    if [ ! -f $kernelImage ] ; then
	[ -n "$verbose" ] && echo "kernel for $version does not exist, not running grubby"
	return
    fi

    set_title

    INITRD=""
    if [ -f $initrdfile ]; then
	[ -n "$verbose" ] && echo "found $initrdfile and using it with grubby"
	INITRD="--initrd $initrdfile"

	if [ -n "$addplymouthinitrd" ]; then
	    INITRD="$INITRD --extra-initrd $bootPrefix/initrd-plymouth.img"
	fi
    fi

    DEVTREE=""
    if [ -n "$devtreefile" -a -f "$devtreefile" ]; then
        [ -n "$verbose" ] && echo "found $devtreefile and using it with grubby"
        DEVTREE="--devtree $devtreefile"
    fi

    DEVTREEDIR=""
    if [ -n "$devtreedir" -a -d "$devtreedir" ]; then
	[ -n "$verbose" ] && echo "found $devtreedir and using it with grubby"
	DEVTREEDIR="--devtreedir $devtreedir"
    fi

    if [ -n "$cfgGrub" ]; then
	[ -n "$verbose" ] && echo "updating $version from $grubConfig"
	ARGS="--grub -c $grubConfig --update-kernel=$kernelImage $INITRD \
		${kernargs:+--args=\"$kernargs\"} \
		${removeargs:+--remove-args=\"$removeargs\"} \
		${mbkernel:+--add-multiboot=\"$mbkernel\"} \
		--title=\"$title\$debugtitle\""

	rungrubby ${ARGS}
	rungrubby --debug ${ARGS}
    else
	[ -n "$verbose" ] && echo "$grubConfig does not exist, not running grubby"
    fi

    if [ -n "$cfgGrub2" ]; then
	[ -n "$verbose" ] && echo "updating $version from $grub2Config"
	ARGS="--grub2 -c $grub2Config --update-kernel=$kernelImage $INITRD \
		${kernargs:+--args=\"$kernargs\"} \
		${removeargs:+--remove-args=\"$removeargs\"} \
		--title=\"$title\$debugtitle\""

	rungrubby ${ARGS}
	rungrubby --debug ${ARGS}
    else
	[ -n "$verbose" ] && echo "$grub2Config does not exist, not running grubby"
    fi

    if [ -n "$cfgGrub2Efi" ]; then
	[ -n "$verbose" ] && echo "updating $version from $grub2EfiConfig"
	ARGS="--grub2 -c $grub2EfiConfig --efi --update-kernel=$kernelImage \
		$INITRD ${kernargs:+--args=\"$kernargs\"} \
		${removeargs:+--remove-args=\"$removeargs\"} \
		--title=\"$title\$debugtitle\""

	rungrubby ${ARGS}
	rungrubby --debug ${ARGS}
    else
	[ -n "$verbose" ] && echo "$grub2EfiConfig does not exist, not running grubby"
    fi

    if [ -n "$cfgLilo" ]; then
	[ -n "$verbose" ] && echo "updating $version from $liloConfig"
	ARGS="--$liloFlag --update-kernel=$kernelImage $INITRD \
		${kernargs:+--args=\"$kernargs\"} \
		${removeargs:+--remove-args=\"$removeargs\"} \
		--title=\"$title\$debugtitle\""

	rungrubby ${ARGS}
	rungrubby --debug ${ARGS}

	if [ -n "$runLilo" ]; then
	    [ -n "$verbose" ] && echo "running $lilo"
	    if [ ! -x $lilo ] ; then
		[ -n "$verbose" ] && echo "$lilo does not exist"
	    else
		$lilo > /dev/null
	    fi
	fi
    else
	[ -n "$verbose" ] && echo "$liloConfig does not exist, not running grubby"
    fi

    if [ -n "$cfgExtlinux" ]; then
	[ -n "$verbose" ] && echo "updating $version from $extlinuxConfig"
	ARGS="--extlinux -c $extlinuxConfig --update-kernel=$kernelImage \
		$DEVTREE $DEVTREEDIR $INITRD ${kernargs:+--args=\"$kernargs\"} \
		${removeargs:+--remove-args=\"$removeargs\"} \
		--title=\"$title\$debugtitle\""

	rungrubby ${ARGS}
	rungrubby --debug ${ARGS}
    else
	[ -n "$verbose" ] && echo "$extlinuxConfig does not exist, not running grubby"
    fi
}

doMkinitrd() {
    if [ -n "$dracut" ]; then
        tool="dracut $dracuthostonly -f $initrdfile $version"
    else
	tool="mkinitrd --allow-missing -f $initrdfile $version"
    fi
    [ -n "$verbose" ] && echo "creating initrd: $tool"
    $tool
    rc=$?
    if [ $rc != 0 ]; then
	echo "mkinitrd failed" >&2
	exit 1
    fi
}

rminitrd() {
    [ -n "$verbose" ] && echo "removing initrd $initrdfile"
    [ -f $initrdfile ] && rm -f $initrdfile
}

doDepmod() {
    [ -n "$verbose" ] && echo "running depmod for $version"
    depmod -ae -F /boot/System.map-$version $version
}

doRmmoddep() {
    [ -n "$verbose" ] && echo "removing modules.dep info for $version"
    if [ -d /lib/modules/$version ]; then
        rm -f /lib/modules/$version/modules.*.bin \
            /lib/modules/$version/modules.{alias,dep,devname,symbols,softdep}
    fi
}

# kernel image for 2.4 is vmlinux
if [ $ARCH = 'ppc64' -o $ARCH = 'ppc' ]; then
  if [ "$kernelmajor" == "2.4" ]; then
      kernelName=vmlinux
  fi
fi

while [ $# -gt 0 ]; do
    case $1 in
	--mkinitrd)
	    initrd="make"
	    ;;

	--rminitrd)
	    initrd="remove"
	    ;;

	--devtree*)
	    if [[ $1 == --devtree\=* ]]; then
		devtreefile=${1#--devtreefile=}
	    else
		devtreefile=$2
		shift
	    fi
	    ;;

	--devtreedir*)
	    if [[ $1 == --devtreedir\=* ]]; then
		devtreedir=${1#--devtreedir=}
	    else
		devtreedir=$2
		shift
	    fi
	    ;;

	--dracut)
	    dracut=--dracut
	    ;;

	--host-only)
	    dracuthostonly=-H
	    ;;

	--initrdfile*)
	    if [[ $1 == --initrdfile\=* ]]; then
		initrdfile=${1#--initrdfile=}
	    else
		initrdfile=$2
		shift
	    fi
	    ;;

	--kernel-args*)
	    if [[ $1 == --kernel-args\=* ]]; then
		kernargs=${1#--kernel-args=}
	    else
		kernargs=$2
		shift
	    fi
	    ;;

	--remove-args*)
	    if [[ $1 == --remove-args\=* ]]; then
		removeargs=${1#--remove-args=}
	    else
		removeargs=$2
		shift
	    fi
	    ;;

	--banner*)
	    if [[ $1 == --banner\=* ]]; then
		banner=${1#--banner=}
	    else
		banner=$2
		shift
	    fi
	    ;;

	--multiboot*)
	    if [[ $1 == --multiboot\=* ]]; then
		mbkernel=${1#--multiboot=}
	    else
		# can't really support having an optional second arg here
		# sorry!
		mbkernel="/boot/xen.gz"
	    fi
	    ;;

        --mbargs*)
            if [[ $1 == --mbargs\=* ]]; then
                mbargs=${1#--mbargs=}
            else
                mbargs="$2"
                shift
            fi
            ;;

	--depmod)
	    moddep="make"
	    ;;

	--rmmoddep)
	    moddep="remove"
	    ;;

	--make-default)
	    makedefault="--make-default"
	    ;;

        --package*)
            if [[ $1 == --package\=* ]]; then
                package=${1#--package=}
            else
                package=$2
                shift
            fi
            ;;

	--add-dracut-args)
	    adddracutargs=--add-dracut-args
	    ;;

	--add-plymouth-initrd)
	    addplymouthinitrd=--add-plymouth-initrd
	    ;;

        --kernel-image*)
            if [[ $1 == --kernel-image\=* ]]; then
                kernelImage=${1#--kernel-image=}
            else
                kernelImage="$2"
                shift
            fi
            if ! [[ -f $kernelImage ]]; then
                echo "Can't find kernel image '$kernelImage'" >&2
                usage
                exit 1
            fi
            ;;

        --kernel-name*)
            if [[ $1 == --kernel-name\=* ]]; then
                kernelName=${1#--kernel-name=}
            else
                kernelName="$2"
                shift
            fi
            ;;

	-v)
	    verbose=-v
	    ;;

	*)
	    if [ -z "$mode" ]; then
		mode=$1
	    elif [ -z "$version" ]; then
		version=$1
	    else
		usage
	    fi
	    ;;
    esac

    shift
done

# make sure the mode is valid
if [ "$mode" != "--install" -a "$mode" != "--remove"  -a "$mode" != "--update" -a "$mode" != "--rpmposttrans" ] ; then
    usage
fi

if [ -z "$version" ]; then
    usage
fi

if [ "$mode" != "--install" -a "$makedefault" ]; then
    usage
fi

kernelmajor=`echo $kernel | cut -d . -f 1,2`

[[ $kernelImage ]] || kernelImage="$bootPrefix/$kernelName-$version"

# set the initrd file based on arch; ia64 is the only currently known oddball
if [ -z "$initrdfile" ]; then
    INITRD_NAME_PREFIX="initrd"
    if [ -n "$dracut" ]; then
	INITRD_NAME_PREFIX="initramfs"
    fi

    if [ `uname -m` = "ia64" ]; then
	initrdfile="/boot/efi/EFI/redhat/$INITRD_NAME_PREFIX-$version.img"
    else
	initrdfile="/boot/$INITRD_NAME_PREFIX-$version.img"
    fi

fi
[ -n "$verbose" ] && echo "initrdfile is $initrdfile"

if [[ ${ARCH} =~ armv[5|7].*l ]]; then
    if [ -z "$SHIPSDTB" -o "$SHIPSDTB" != "yes" ]; then
	if [ -n "$dtbfile" -a -f "$bootPrefix/dtb-$version/$dtbfile" ]; then
	    devtreefile="$bootPrefix/dtb-$version/$dtbfile"
	    [ -n "$verbose" ] && echo "devtreefile is $devtreefile"
	elif [ -d "$bootPrefix/dtb-$version/" ]; then
	    devtreedir="$bootPrefix/dtb-$version/"
	    [ -n "$verbose" ] && echo "devtreedir is $devtreedir"
	fi
    fi
fi
[ -n "$verbose" ] && echo "devtreedir is $devtreedir"

# add dracut kernel args if requested
if [ -n "$dracut" -a -n "$adddracutargs" ]; then
    [ -r /etc/vconsole.conf ] && . /etc/vconsole.conf
    [ -r /etc/locale.conf ] && . /etc/locale.conf

    while read opt rd_opt; do
        [ -n "${!opt}" ] && kernargs="$kernargs $rd_opt=\"${!opt}\""
    done <<< 'KEYMAP      rd.vconsole.keymap
              FONT        rd.vconsole.font
              FONT_MAP    rd.vconsole.font.map
              FONT_UNIMAP rd.vconsole.font.unimap
              UNICODE     rd.vconsole.font.unicode
              EXT_KEYMAP  rd.vconsole.keymap.ext
              LANG        rd.locale.LANG
              LC_ALL      rd.locale.LC_ALL'
fi

# set this as the default if we have the package and it matches
if [ "$mode" == "--install" -a "$UPDATEDEFAULT" == "yes" -a -n "$package" -a -n "$DEFAULTKERNEL" ]; then
    if [ "$package" == "$DEFAULTKERNEL" -o "${package}-core" == "$DEFAULTKERNEL" ]; then
        makedefault="--make-default"
        [ -n "$verbose" ] && echo "making it the default based on config"
    fi
fi

if [ "$moddep" == "make" ]; then
    doDepmod
elif [ "$moddep" == "remove" ]; then
    doRmmoddep
fi

if [ "$initrd" == "make" ]; then
    doMkinitrd
elif [ "$initrd" == "remove" ]; then
    rminitrd
fi

if [ ! -x $grubby ] ; then
    [ -n "$verbose" ] && echo "$grubby does not exist"
    exit 0
fi


[ -n "$grubConfig" ] && [ -f "$grubConfig" ] && cfgGrub=1;
[ -n "$grub2Config" ] && [ -f "$grub2Config" ] && cfgGrub2=1;
[ -n "$grub2EfiConfig" ] && [ -f "$grub2EfiConfig" ] && cfgGrub2Efi=1;
[ -n "$liloConfig" ] && [ -f "$liloConfig" ] && cfgLilo=1;
[ -n "$extlinuxConfig" ] && [ -f "$extlinuxConfig" ] && cfgExtlinux=1;

# if we have a lilo config on an x86 box, see if the default boot loader
# is lilo to determine if it should be run
if [ -n "$cfgLilo" -a -n "$isx86" ]; then
    runLilo=$($grubby --bootloader-probe | grep lilo)
fi

if [ "$mode" == "--install" ]; then
    install
elif [ "$mode" == "--remove" ]; then
    remove
elif [ "$mode" == "--update" ]; then
    update
elif [ "$mode" == "--rpmposttrans" ]; then
    rpmposttrans
fi

exit 0